Content Retrieval & Peer to Peer Storage: A Practical Explainer for IPFS Gateways

The Interplanetary File System (IPFS) is a peer-to-peer protocol for storing and accessing files and websites. As a distributed peer-to-peer protocol, it's fundamentally different from the HTTP protocol. With the help of IPFS Gateways, it's possible to reap the benefits of IPFS using the HTTP protocol.

This blog post is the second of a two-part series about IPFS gateways:

In , which was mostly theoretical, you learned about the challenges with the client-server model and how IPFS approaches these challenges with peer-to-peer networking and content addressing. You then learned about the relationship between IPFS and HTTP(S) and IPFS gateways. Finally, you fetched an image from an IPFS gateway and learned about IPFS gateway resolution styles.

In this second part, you will learn practical tips and tricks for using IPFS gateways in real-world applications:

• Common challenges with IPFS HTTP Gateways
• IPFS gateway request lifecycle
• Debugging IPFS content discovery and retrieval
  • Debugging with kubo and IPFS Check
  • Debugging with pl-diagnose
• Content publishing lifecycle
• Debugging content publishing
• Pinning, caching, and garbage collection
• Public vs. dedicated vs. self-hosted gateways
• Best practices for self-hosting an IPFS node/gateway
• Tip: Pin your CIDs to multiple IPFS nodes
• Tip: Use a custom domain that you control as your IPFS gateway
• Summary

By the end of this blog post, you should be equipped with the knowledge and tools to use IPFS gateways confidently and systematically debug when you face problems.

Common challenges with IPFS HTTP Gateways

One of the questions most frequently asked by developers using IPFS in our various community channels is -

Why CIDs aren't retrievable via public IPFS gateways

or, in other cases,

Why are CIDs so slow to load?

For example, when you first upload content to your local IPFS node, it's not uncommon to get when requesting the CID from a public gateway.IPFS gateways abstract the distributed aspect of IPFS while giving you a familiar HTTP interface, but that doesn't mean that complexity is gone.

From a high level, when faced with challenges (either slowness or timeouts) fetching a CID from an IPFS gateway, it's typically related to one of the following:

• The IPFS gateway.
• The provider of the CID, i.e., the IPFS node pinning the CID, might be unreachable or down.
• You (or the pinning service) are not providing your CIDs to the IPFS network. Providing is the process by which providers of a given CID advertise it to the distributed hash table (DHT) to make it discoverable.
• Network latency between the client and the IPFS gateway or the gateway and the provider.

Given all of these factors, it isn't easy giving blanket advice. This is where understanding the lifecycle of a CID request to an IPFS gateway is useful, as it will allow debugging problems quickly.

IPFS gateway request lifecycle

When a request for a CID reaches an IPFS gateway, the gateway checks whether the CID is cached locally before attempting to retrieve it from the network.

If the CID is in the gateway's cache, the gateway will respond to the HTTP request with the CID's content. If the CID is not in the cache, the CID has to be retrieved from the IPFS network. This is a two-step process:

1. Content discovery/routing: asking direct peers and querying the to find the peer IDs and of peers providing the CID (referred to as providers).
2. Content Retrieval: connecting to one of the providers, fetching the CID's content, and streaming the response to the client.

Debugging IPFS content discovery and retrieval

When trying to debug why a CID isn't retrievable from a gateway, the most useful thing to do is to narrow down the root cause.

It can be either a problem with content routing: finding provider records for the CID in the DHT – or a problem with content retrieval: connecting to the peer from the provider records in the DHT.

Debugging with kubo and IPFS Check

If you are running a running IPFS node, run the following command to determine if any peers are advertising the CID (making it discoverable):

ipfs dht findprovs [CID]

If providers for the CID are found by searching the DHT, their Peer IDs are returned:

12D3KooWChhhfGdB9GJy1GbhghAAKCUR99oCymMEVS4eUcEy67nt
12D3KooWJkNYFckQGPdBF57kVCLdkqZb1ZmZXAphe9MZkSh16UfP
QmQzqxhK82kAmKvARFZSkUVS6fo9sySaiogAnx5EnZ6ZmC
12D3KooWSH5uLrYe7XSFpmnQj1NCsoiGeKSRCV7T5xijpX2Po2aT

If no providers were returned, the cause of your problem might be content publishing. Skip to the next section to learn how content publishing work and how to resolve such issues.

If provider records have been found (the list of Peer IDs), the next step is to get the network addresses of one of those peers with the following command:

ipfs id -f '<addrs>' [PEER_ID]

The result of this command looks as follows:

/ip4/145.40.90.155/tcp/4001/p2p/12D3KooWSH5uLrYe7XSFpmnQj1NCsoiGeKSRCV7T5xijpX2Po2aT
/ip4/145.40.90.155/tcp/4002/ws/p2p/12D3KooWSH5uLrYe7XSFpmnQj1NCsoiGeKSRCV7T5xijpX2Po2aT
/ip6/2604:1380:45e1:2700::d/tcp/4001/p2p/12D3KooWSH5uLrYe7XSFpmnQj1NCsoiGeKSRCV7T5xijpX2Po2aT
/ip6/2604:1380:45e1:2700::d/tcp/4002/ws/p2p/12D3KooWSH5uLrYe7XSFpmnQj1NCsoiGeKSRCV7T5xijpX2Po2aT

To check if the CID is retrievable from the returned addresses, copy one of the public addresses and the CID into .

IPFS Check will test whether the peer/node is dialable and whether the CID is retrievable.

Debugging with pl-diagnose

is an alternative web-based tool that can perform a lot of the steps above directly from the browser.

You can use it to look up providers for a CID, checking if a is reachable by other peers and whether a node is serving the CID.

Content publishing lifecycle

Now that you're familiar with content retrieval, we'll look at the other end of retrieval, namely, content publishing. Content publishing is how your content becomes discoverable to peers in the IPFS network.

When you add a file to an IPFS node using the ipfs add command, here's how it becomes published and discoverable across the network:

1. The file is chunked into blocks, and a is constructed. You get back the root CID of the DAG.
2. The blocks of the file are made available over so that any peer can request them.
3. The node advertises mappings of CIDs to network addresses known as provider records (including CIDs of the blocks and the root CID) to the DHT. This is a continuous process that repeats every 12 hours as long as the node is running (accounting for peer churn). The provider records have an expiry time of 24 hours (accounting for provider churn).

Debugging content publishing

IPFS network measurements conducted by the , show that . While there are efforts explored in that talk to improve this, it’s useful to understand how to troubleshoot problems related to content publishing.

Generally speaking, as you add more files to your IPFS node, the longer reprovide runs take. When a reprovide run takes longer than 24 hours (the expiry time for provider records), your CIDs will become undiscoverable.

To find out how long a reprovide run takes, run the following command:

ipfs stats provide

The result should look like this:

TotalProvides:          7k (7,401)
AvgProvideDuration:     271.271ms
LastReprovideDuration:  13m16.104781s
LastReprovideBatchSize: 1k (1,858)

If you notice that the LastReprovideDuration value is reaching close to 24 hours, you should consider one of the following options:

• Enabling the in Kubo. This configuration improves content publishing times significantly by maintaining more connections to peers and a larger routing table and batching advertising of provider records. It should be noted that this comes at the cost of increased resource consumption.
• Change the from all to either pinned or roots which both only advertise provider records for explicitly pinned content:
  • pinned will advertise both the root CIDs and child block CIDs (entire DAG) of explicitly pinned content.
  • roots will only advertise the root CIDs of pinned content, reducing the total number of provides in each run. This strategy is the most efficient but should be done with caution, as it will limit discoverability to only root CIDs. If you are adding folders of files to IPFS, only the CID for the pinned folder will be advertised (all the blocks will still be retrievable with Bitswap once a connection to the node is established).

To manually trigger a reprovide run, run the following command:

ipfs bitswap reprovide

Pinning, caching, and garbage collection

Existing IPFS have a caching mechanism that will keep CIDs local for a short time after the node has fetched it from the network.

However, these objects may get garbage-collected periodically.

is the mechanism that allows you to tell IPFS to always store a given CID — by default on your local node. In addition to , you can also pin your CIDs to .

In other words, caching is the mechanism by which CID is kept around on the node for a short period until garbage-collected, while pinning is a deliberate choice you make to keep the CID stored on the node.

Caching is why requesting a CID for the first time from a gateway can take time, while subsequent requests are much faster.

Pinning services are services that run IPFS nodes for you and allow you to upload files and pin CIDs, making them available to the IPFS network. Examples include:

One thing to note about caching is that it is often multi-layered. In addition to caching done by the IPFS node, it's common to add another layer of HTTP caching based on HTTP cache-control headers. Since CIDs are immutable, there's a wide range of caching opportunities, e.g., putting a CDN or an edge cache in front of an IPFS gateway node.

Garbage collection is the process by which an IPFS node frees up storage by deleting data that is no longer required. To read more about garbage collection, .

Public vs. dedicated vs. self-hosted gateways

In its simplest form, a gateway is an IPFS node that also accepts HTTP requests for CIDs. But the reality of IPFS gateways is nuanced, as there are different flavors of IPFS gateways: public, dedicated, and self-hosted.

Public gateways allow anyone to use HTTP to fetch CIDs from the IPFS network.

You can find public gateway operators in the and check whether they are online and the latency from your location.

Beware that many public gateways are provided on a best-effort basis without any SLA. Public gateways are prone to abuse which is why many implement request limits.

Dedicated gateways such as , and are services that combine CID pinning with an IPFS gateway and guarantee the availability of your pinned CIDs via their gateway.

Another rather unique example of a public gateway is which races CID requests across multiple public gateways to provide the fastest response in addition to caching responses at the edge (find the ).

is a paid feature recently launched by the NFT.Storage team, which is similar to dedicated gateways. It gives you the ability to preload your CIDs in all of Cloudflare's 270 points of presence, giving a lightning-fast read experience via the closest CDN location to your users.

Finally, a self-hosted gateway refers to an IPFS node(s) configured as a gateway that is hosted by you, either on your local machine or in the cloud.

Choosing from the three approaches depends on your requirements; if performance is critical, self-hosting an IPFS node and gateway or using a dedicated gateway is a reasonable choice that can complement the usage of public gateways.

Best practices for self-hosting an IPFS node/gateway

If you are running an IPFS node configured as an IPFS gateway, there are steps you can take to improve the discovery and retrievability of your CIDs.

• Set up with the pinning services that pin your CIDs.
• Make sure that your node is publicly reachable.
  • You can check this by running ipfs id and checking for the "/ipfs/kad/1.0.0" value in the list of protocols, or in short, by running ipfs id | grep ipfs\/kad.
  • If your node is not reachable because you are behind NAT, .
• Ensure that you are correctly returning HTTP cache headers to the client if the IPFS gateway node is behind a reverse proxy. Pay extra attention to Etag, Cache-Control, and Last-Modified headers. Consider leveraging the list of CIDs in X-Ipfs-Roots for smarter HTTP caching strategies.
• Put a CDN like Cloudflare in front of the IPFS gateway.
• Consider enabling the (see the content publishing section for trade-offs).
• Test and monitor your internet connection speed with a tool like .
• Monitor disk I/O and make sure that no other processes are causing disk I/O bottlenecks with a tool like or

Tip: Pin your CIDs to multiple IPFS nodes

Drawing on the principles laid out above, it's sensible to pin your CIDs to multiple IPFS nodes to ensure reliable availability and resilience to failures of nodes and network partitions.

With IPFS, increasing redundancy is typically done by your CIDs on multiple IPFS nodes or pinning services.

As a general rule of thumb, the more nodes pinning a CID in the IPFS network, the better the chances of it being retrievable.

To make pinning easier, there's a vendor-agnostic

Using this remote pinning API, you can as part of your workflow for uploading immutable data to IPFS.

If you're not running an IPFS node, you can start by uploading a file to one service and then using the returned CID to pin it to other services.

Tip: Use a custom domain that you control as your IPFS gateway

Imagine the following scenario: you deploy your web app to IPFS, which contains media with absolute URLs to a public gateway experiencing an outage. For example, your web app displays the image with an absolute path to the CID: //bafybeibml5uieyxa5tufngvg7fgwbkwvlsuntwbxgtskoqynbt7wlchmfm.ipfs.dweb.link.

You may be able to reach your media using a different gateway, but since the web app's content is immutable, the links to the IPFS gateway, which is down, will not load.

For these reasons, it's sensible to use a domain within your control to route HTTP traffic to a gateway. This approach potentially gives you the flexibility to implement additional performance optimizations.

Practically speaking, this can be implemented using several approaches depending on your willingness to run infrastructure:

• Point a domain you control, e.g., *.ipfs.yourdomain.io point to a reverse proxy like nginx which will proxy requests to a public gateway, allowing you to switch public gateways if there's downtime.
• Use a service like or to implement a lightweight reverse proxy to IPFS gateways.

Summary

In this blog post, you learned many tips, tricks, and tools to use IPFS gateways effectively and systematically debug when you face problems.

We started with common challenges with IPFS gateways and looked into the details of content discovery, publishing, the gateway request lifecycle, the different kinds of IPFS gateways, caching, garbage collection, pinning, and best practices when self-hosting IPFS nodes/gateways.

As a next step:

• Chat with us on , , or

---

Authored by: