paint-brush
Here's How To Fix Your Ethernet If It's Not Working by@robertcnorthlakes
312,968 reads
312,968 reads

Here's How To Fix Your Ethernet If It's Not Working

by RobertMarch 11th, 2020
Read on Terminal Reader
Read this story w/o Javascript

Too Long; Didn't Read

If your WiFi is working properly but your wired ethernet connection isn't, here's a bunch of things you can do. The first thing you need to do is turn off the WiFi. Right-click on the WiFi icon in the notification area and click "Open Network and Internet Settings". Go to the WiFi tab and use the toggle to turn it off.

Companies Mentioned

Mention Thumbnail
Mention Thumbnail
featured image - Here's How To Fix Your Ethernet If It's Not Working
Robert HackerNoon profile picture
If your WiFi is working properly but your wired ethernet connection isn't, here's a bunch of things you can do. The first thing you need to do is turn off the WiFi. Right-click on the WiFi icon in the notification area and click "Open Network and Internet Settings". Go to the WiFi tab and use the toggle to turn it off.
If this doesn't solve it, keep following our directions in the article.

Check out this related video below.

Make Sure Your Ethernet is Enabled

If your WiFi is disabled and you still don't have a network connection, make sure that your ethernet is enabled. You can also check this in Network and Internet Settings.
Next thing to do is find the right network. It should say "Local Area Connection". Check under it. If it says "Not connected", right-click on it and select "Enable". Wait a few seconds to see if it works.

Plug the Ethernet Cable into a Different Port

If it's been a minute and it still isn't working, try plugging the cable into another port on the router. If this works, it means your router is faulty and it might be time for you to replace it.If that still doesn't work, you can try swapping your ethernet cables. You might have to borrow or buy a new cable for this.

Hardware Issues vs. OS Issues

If you've done everything above and nothing works, that means your computer is the problem. To find out whether it's the operating system or hardware that's faulty, you can set up a Live Linux disc and boot from that.If it still doesn't work on Linux, then the problem lies in your hardware.
If your ethernet works in Linux, then Windows is the problem. Try reinstalling your ethernet drivers by following these steps:
  1. Go back to Windows. Enter "Device Manager" in the start menu and select it.
  2. Expand the Network Adapter section.
  3. Right-click on the ethernet adapter then select "uninstall".
  4. Click on "OK" to confirm.
  5. Restart your computer to reinstall the driver.
Now that we've covered all bases, hopefully your ethernet is working now! Good luck!

References

  • //www.computerrepairsnorthlakes.com/simple-fixes-you-can-do-when-having-internet-connection-problems/

Agree or disagree with some of the ideas presented in this article?

Looking for more troubleshooting articles? Subscribe to our newsletter in the footer below!

바카라사이트 바카라사이트 온라인바카라